fbpx

Pro 2(1-phase TopBoost + PowerBoost)

Description

Features:

  • Power supply with TopBoost, PowerBoost and configurable overload behavior
  • Configurable digital signal input and output, optical status indication, function keys
  • Communication interface for configuration and monitoring
  • Optional connection to IO-Link or Modbus RTU
  • Suitable for both parallel and series operation
  • Natural convection cooling when horizontally mounted
  • Pluggable connection technology
  • Electrically isolated output voltage (SELV/PELV) per EN 61010/UL 61010
  • Marker slot for WAGO Marker Cards (WMB) and WAGO Marking Strips

Details:

Input:

Phases 1
Nominal input voltage Ui nom 1 x AC 100 … 240 V
Input voltage range AC 90 … 264 V; DC 130 … 373 V
Nominal mains frequency range 47 … 63 Hz; 0 Hz
Input current Ii ≤ 1 A (240 VAC; Nominal load); ≤ 1.8 A (100 VAC; Nominal load)
Inrush current ≤ 9 A (after 1 ms)
Power factor correction (PFC) Active
Mains failure hold-up time ≥ 20 ms (230 VAC)

Output:

Nominal output voltage Uo nom DC 24 V (SELV)
Output voltage range DC 24 … 28 V (adjustable)
Default setting DC 24 V
Nominal output current Io nom 5 A (24 VDC)
Nominal output power 120 W
Control deviation ≤ 1 %
Residual ripple ≤ 70 mV (peak-to-peak)
Current limitation 1.1 x Io nom (typ.)
Overload behavior TopBoost/PowerBoost/Time-limited constant current mode (other overload behaviors can be set)
PowerBoost DC 7.5 A (5 s)
TopBoost up to 600 %
Do NOT follow this link or you will be banned from the site!