fbpx

T Series

T Series

DPDT  1 Amp
Features

  • Compact size and low profile: 5(H)mm×14(L)mm×9(W)mm
  • Meets FCC part 68 requirements
  • High sensitivity:140mW nominal operating power
  • SMT and DIP types available
  • Fully Sealed
hasco Recovered

Description

Contact Ratings

Contact Arrangement 2C
Contact Resistance 100mΩ (0.1A 6VDC)
Contact Material Silver Alloy, Gold Flash
Contact Rating(Resistive) 1A, 2A/30VDC; 0.5A/125VAC
Max. Switching Voltage 125VAC/110VDC
Max. Switching Current 2A
Max. Switching Power 62.5VA/30W
Mechanical Life 1×108 operations
Electrical Life 2×105 operations 1A 30VDC
1×105 operations 0.5A 125VAC

Ordering Information

t 2 1

Characteristics

Insulation Resistance 1000MΩ (500VDC)
Dielectric Strength Between coil & contacts 1000VAC
Between open contacts 750VAC
Between 2 pole contacts 1000VAC
Surge withstand voltage Between coil & contacts 1500VAC
Between open contacts 1500VAC
Between 2 pole contacts 1500VAC
Operate time (at nomi. volt.) ≤3ms
Release time (at nomi. volt.) ≤3ms
Humidity 98% RH, 40°C
Ambient temperature -40°C ~ +70°C
Shock Resistance Functional 490m/s2
Destructive 980m/s2
Vibration resistance Functional 10Hz to 55Hz 3mm DA
Destructive 10Hz to 55Hz 5mm DA
Unit weight Approx. 1.5g
Construction Wash tight sealed

Notes:
1) The data shown above are initial values.
2) Please find coil temperature curve in the characteristic curved below.

Coil Data at 20°C

Single side stable
Nominal
Voltage
VDC
Pick-up
Voltage
(Max.)
VDC
Drop-out
Voltage
(Min.)
VDC
Max.
Allowable
Voltage
VDC
Coil
Resistance
Ω±10%
3 2.25 0.3 4.5 64.4
5 3.75 0.5 7.5 178
6 4.50 0.6 9.0 257
9 6.75 0.9 13.5 579
12 9.00 1.2 18.0 1028
24 18.00 2.4 36.0 2880
1 coil latching
Nominal
Voltage
VDC
Action
Voltage
(Max.)
VDC
Reset
Voltage
(Min.)
VDC
Max.
Allowable
Voltage
VDC
Coil
Resistance
Ω±10%
3 2.25 2.25 4.5 90
5 3.75 3.75 7.5 250
6 4.50 4.50 9.0 360
9 6.75 6.75 13.5 810
12 9.00 9.00 18.0 1440
24 18.00 18.00 36.0 3840

Coil

Coil Power Single side stable:140mW(24VDC:200mW)
1 coil latching:100mW(24VDC:150mW)

Safety Approal Ratings

UL&CUL 0.5A/125VAC
1A, 2A/30VDC

Outline Dimensions, Wiring Diagram And PC Board Layout Unit: inch(mm)

Biserial straight pin
Outline Dimensions
t 3 1
Wiring Diagram
(Bottom view)
t 4 1
PCB Layout
(Bottom view)
t 5 1
Surface mount
Outline Dimensions
t 6 1
Wiring Diagram
(Bottom view)
t 7 1
PCB Layout
(Bottom view)
t 8 1

Remark:
1) In case of no tolerance shown in outline dimension: outline dimension ≤1mm,tolerance should be ±0.2mm; outline dimension >1mm and ≤5mm,tolerance should be ±0.3mm;outline dimension >5mm, tolerance should be ±0.4mm.
2) The tolerance without indicating for PCB layout is always ±0.1mm.

Characteristic Curves

t 9
t 10
Addcom Solution Pte Ltd